inconel 600 vs inconel 625, inconel 600 pipe, inconel 625 pipe, inconel 600 tube, inconel 625 tube, inconel 600 plates & sheets, inconel 625 plates & Sheets
May 23, 2019 Inconel 0 Comments

Inconel 600 vs Inconel 625

When considering Inconel 625 vs Inconel 600, there are quite a number of differences that can be seen. For instance, Inconel 625 has a nickel content between the range of a minimum of 58% and this means that it thus falls in the middle of the 330 and 600 alloys. On the other hand, Alloy 600, has a nickel content of a minimum of 72%.

Understanding Inconel 625 vs Inconel 600, Grade 600 is extremely popular and at high temperatures, it exhibits superb resistance to oxidation. It also displays first class resistance to carburization, it has superb tensile strength, it offers very good thermal shock resistance and it also shows above-average resistance to oxidation. If UNS N06600 is stress relieved, it shows excellent resistance to chloride stress corrosion cracking. UNS N06625 has very good crevice corrosion resistance, it displays superb creep rupture strength, it has excellent chloride pitting resistance and it also exhibits excellent fatigue resistance. As compared with other alloys of Inconel, Grade 625 is pretty easy to weld.

Difference Between UNS N06600 & UNS N06625 Grade

Incoloy 600 is used to a great extent for heat-treating trays and baskets, as furnace components and in the heat-treating industry it is used for muffles. Incoloy 625 is used in seawater equipment, flare stacks, jet engine exhausts and because it is resistant to high temperatures and various chemicals, it is also used in chemical plant equipment.

Whatever the reasons that you might be comparing Inconel 625 vs Inconel 600, one thing you can be sure of is that we are leading exporters, suppliers, stockists and manufacturers of Inconel 625 tubes, as well as Inconel 600 tubes. We manufacture our Grade 625 & 600 pipes from the finest raw materials. To ensure that our Inconel 600 pipes  meet global standards, we run them through very tough quality tests such as: Hardness Test, Flaring Test, Micro and MacroTest, Tensile of Area Test, Flattening Test, Spectro Analysis, Pitting Resistance Test, Intergranular Corrosion Test, Positive Material Identification Testing, etc. It is only after our Inconel 625 pipes and tubes have passed all of these rigid quality tests, do we then dispatch them to our clients, all over the globe.